Free Delivery in Calgary
120 V AC Wireless Talking Smoke & Carbon Monoxide Alarm with 10-Year Sealed Battery Backup P4010ACSCO-WCA
CA$99.00
10-year Sealed Lithium Battery and Wireless (and Hardwire) Interconnect
- Wireless Interconnect – Proprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound.
- 120 V Direct Wire with 10-Year Sealed-in Lithium Battery Backup – No battery replacement required over the 10 year life of the alarm.
- 10-Year Sealed-in Lithium Battery – No battery replacement required over the 10 year life of the alarm.
- Voice Notifications – Unit verbally announces “Fire!”, "Carbon Monoxide", and other alerts such as “Replace Alarm,” which helps the user better understand current status of the unit.
- Alarm Locate Feature – Quickly find initiating alarm by silencing other alarms in the network.
- Photoelectric Sensor – Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
- Hush – Will temporarily silence nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode.
- Part # - P4010ACSCO-WCA
120 V AC Wireless Smoke Alarm with 10-Year Sealed Battery Backup P4010ACS-WCA
CA$67.00
Wireless Interconnect and 10-year sealed lithium battery backup
- Wireless Interconnect – Proprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound.
- 120 V Direct Wire with 10-Year Sealed-in Lithium Battery Backup – No battery replacement required over the 10 year life of the alarm.
- Voice Notifications – Unit verbally announces “Fire!” and other alerts such as “Replace Alarm,” which helps the user better understand current status of the unit.
- Alarm Locate Feature – Quickly find initiating alarm by silencing other alarms in the network.
- Photoelectric Sensor – Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
- Hush™ – Will temporarily silence nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode.
- Part # - P4010ACS-WCA
120V AC Talking Smoke & Carbon Monoxide Alarm with Front-Load AA Battery Backup 900-0119
CA$66.00
Provides protection from two hazards – fire and CO – in one unit.
- Combined Smoke & Carbon Monoxide Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and protects against both fire and carbon monoxide dangers.
- Intelligent Sensor Technology – Combines the detection capabilities of an ionization smoke sensor with that of an electrochemical carbon monoxide sensor. When either sensor notices a potential hazard, the alarm will adjust its smoke sensitiivity to differentiate between a real hazard and a false one.
- Voice Warning – Announces the hazard type detected (in English and French). Alarm announces “FIRE!” when a smoke or fire hazard is detected and announces “WARNING! CARBON MONOXIDE!” when a CO hazard is detected. Also announces “LOW BATTERY” when it is time to replace the batteries.
- 120 V Interconnectable – Will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), CO and heat alarms.
- AA Front-Loading Battery Backup – Change batteries without the need to remove the unit from the ceiling, providing continuous protection in the case of a power outage.
- Tamper Resistant – Unit will lock to mounting bracket to deter theft or tampering.
- End of Life Notification – Ten (10) years after unit is first powered, this alarm will beep two times every 30 seconds to indicate it is time to replace the alarm.
- Alarm Memory: The green LED will flash every second during alarm. When the alarm condition goes away, the originating alarm unit will flash the green LED every 16 seconds until the Test / Reset button is pressed, thus resetting the alarm.
- Test Feature – Tests the alarm circuitry and triggers the voice announcement
- Hush® Feature – Temporarily silences nuisance alarms for approximately 9 minutes (will announce “HUSH MODE ACTIVATED,” or “HUSH MODE CANCELLED.”).
- Reset Feature – Resets the carbon monoxide alarm
- Peak Level Memory – If alarm has detected a CO level of 100ppm or higher since it was last reset, the voice alarm will announce “CAUTION, CARBON MONOXIDE PREVIOUSLY DETECTED”
120V AC Worry-Free Smoke & Carbon Monoxide Alarm with 10-Year Sealed-in Battery Backup i12010SCOCA
CA$69.00
Provides protection from two hazards – fire and CO – in one unit with 10-year sealed lithium battery backup.
- Combined Smoke & Carbon Monoxide Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and protects against both fire and carbon monoxide dangers.
- Intelligent Sensor Technology – Combines the detection capabilities of a ionization smoke sensor with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, the alarm will adjust its smoke sensitiivity to differentiate between a real hazard and a false one.
- Voice Warning – Announces the hazard type detected (in both English and French). Alarm announces “Fire! Fire!” when a smoke or fire hazard is detected and announces “Warning! Carbon Monoxide!” when a CO hazard is detected or “Low Battery!”.
- 120V Interconnectable – Will interconnect with up to 24 other devices (18 of which can be initiating), including smoke alarms (limit of 12), CO and heat alarms.
- 10-Year Sealed Lithium Battery Backup – Eliminates the need to replace the battery. No battery to replace for the life of the alarm (10 years). Battery backup automatically activates when the alarm is attached to mounting bracket.
- Tamper Resist Feature – Unit will lock to mounting bracket to deter theft or tampering.
Multi-function One Button Design includes:
- Hush® Feature – Temporarily silences nuisance alarms for approximately 9 minutes (smoke must be present before Hush® is activated).
- Test Feature – Simultaneously tests the unit’s electronics and verifies alarm operation.
- Reset Feature – Resets the carbon monoxide alarm
Worry-Free 120V AC Smoke Alarm with 10-Year Battery Backup i12010S-CA
CA$42.00
Worry-Free 120V AC Wire-in Smoke Alarm with Sealed 10-Year Battery Backup
- 120 V Interconnectable – Will interconnect with up to 24 other devices (18 of which can be initiating).
- 10-Year Sealed Lithium Battery Backup – No battery to replace for the life of the alarm (10 years).
Multi-function One Button Design includes:
- Hush® Feature – Temporarily silences nuisance alarms.
- Test Feature – Simultaneously tests the unit’s electronics and verifies alarm operation.
- Tamper Resist Feature – Unit will lock to mounting bracket to deter theft or tampering.
- Ionization Technology – may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms.
- Part #: i12010S-CA
120V AC Smoke Alarm with 9V Battery Backup P1275CA
CA$23.00
120V AC Wire-in Smoke Alarm with 9V Battery Backup
- Ionization Technology – May detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms.
- 120 V Interconnectable – Will interconnect with up to 24 other devices (18 of which can be initiating).
- 9 V Battery Backup (included) – Provides continuous protection even during power outages.
- Multi-function One Button Design includes:
- Hush® Feature – Temporarily silences nuisance alarms.
- Test Feature – Simultaneously tests the unit’s electronics and verifies alarm operation.
- Tamper Resist Feature – Tamper resist locking pin deters from tampering or theft.
- Item #: P1275CA
Drill Powered Hydrostatic Test Pump (drill not included)
CA$905.00
Features
- Lightweight since the power source is separate.
- Works on commercial and residential water systems.
- Pumps are self-priming and work with pressurized or non-pressurized water supply.
- Storage case keeps the pump clean and organized.
- No drop cord needed when used with a cordless drill.
- Requires 18V cordless or ½” corded drill with 1500 RPM (not included).
